|
| |
Change
Documax from an invoice printer to an E-Ticket printer
-
 Check
that the LCD display shows ONLINE ITI INV
-
Press the On/Off
Line button. LCD display should now read
"OFFLINE".
-
Press the Park
button. This will automatically lower the paper
into the tractor feeds located at the bottom of the printer.
|
Alert: |
The
tension knob located on the right side is
NEVER
to be adjusted manually. |
This knob will automatically adjust when documents are
loaded and is determined by the printer profile. |
The Closed Keypad
|
Next Menu |
Line Feed |
▲
Adjust |
Load Form Feed |
●
Ready |
 |
|
 |
 |
 |
 |
| |
|
|
|
|
 |
 |
 |
 |
|
Profile |
Tear Off |
Adjust
▼ |
Park Path |
-
Turn printer
off. (Power switch is located on the back, on the left hand
side.)
-
Open the
tractor feed doors & remove the existing paper stock.
-
Place the top
three holes of the E-TKT stock over the bottom 3 sprockets of
the tractor feeds.
-
Close tractor
doors and turn on printer.
-
Press the
Profile button until the LCD display reads TAT TY04.
-
Open the
keypad door. LCD display should now
show M1 PAGE FORMAT.
The Open Keypad
|
On/Off
Line |
▲
Feature |
▲
Value |
Enter |
●
Ready |
 |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Quick
Access |
Feature
▼ |
Value
▼ |
Adjust
Form |
| |
|
|
|
| |
|
|
|
| |
|
|
|
-
Press the
▼
Feature key until the LCD screen changes to "FORM LENGTH 42"
-
Press the
▼
Value key until the value is change to read 21.
-
Press the
Enter button to save changes. (The printer will “beep”)
-
Press the
NEXT MENU button until the LCD display shows M7 PROFILE CONTROL.
-
Press the
▼
Feature key until the screen reads SAVE PROFILE.
-
Press the Enter button to save changes.
-
Close the
keypad door.
-
Press Load
to load the e-TKT stock into the printer. LCD screen should now read
ONLINE TAT TY04.
Note: If
reading "OFFLINE" press the "On/Off Line" Button.
Apollo Resources
S*PRO/PRINTER-DOCUMAX
Additional Resources
Hardware
Manual - Section 5B
Steps to access the Documax Printer
Profiles to check or change settings
|
|
